PROPELLER SHAFT — Propeller Shaft PR-5 (b) Using SST to hold the flange, remove the nut. SST 09330-00021 (c) Place the matchmarks on the flange and shaft. (d) Using SST, remove the flange from the intermediate shaft. SST 09557-22022 (e) Remove the center support bearing from the intermed- iate shaft. 3. INSPECT CENTER SUPPORT BEARING Check that the bearing turns freely. If the bearing is damaged, worn, or does not turn freely, replace it. REPLACEMENT OF SPIDER BEARING 1. PLACE MATCHMARKS ON SHAFT AND FLANGE OR YOKE 2. REMOVE SNAP RINGS (a) Slightly tap in the bearing outer races. (b) Using two screwdrivers, remove the four snap rings from the grooves.