EG–50 ENGINE – ENGINE MECHANICAL 2JZ-GTE P12293 4. 2JZ–GTE: REMOVE ENGINE HANGERS AND GROUND STRAP 5. 2JZ–GTE: REMOVE CAMSHAFT POSITION SENSORS 6. REMOVE EGR COOLER P00267 7. REMOVE VALVE LIFTERS AND SHIMS HINT: Store the valve lifters and shims in correct order. SST P12308 8. REMOVE VALVES (a) Using SST, compress the valve spring and remove the 2 keepers. SST 09202–70010 (b) Remove the spring retainer, valve spring, valve and spring seat. HINT: Store the valves, valve springs, spring seats and spring retainers in correct order. P00266 (c) Using needle–nose pliers, remove the oil seal. P02137 CYLINDER HEAD COMPONENTS INSPECTION AND REPAIR 1. CLEAN TOP SURFACES OF PISTONS AND CYLINDER BLOCK (a) Turn the crankshaft, and bring each piston to top dead center (TDC). Using a gasket scraper, remove all the carbon from the piston top surface.