MA–14 MAINTENANCE – MAINTENANCE OPERATIONS Filler Plug Drain Plug Z13347 21. REPLACE TRANSMISSION OIL (FLUID) AND DIFFERENTIAL OIL A. Replace manual transmission oil (a) Remove the filler and drain plugs, and drain the oil. (b) Reinstall the drain plug securely. (c) Add fresh oil untill it begins to run out of the filler hole. Transmission oil: 2JZ–GE Oil grade API GL–5 Viscosity SAE 75W–90 Capacity 2.6 liters (2.7 US qts, 2.3 Imp. qts) 2JZ–GTE Oil Castle gear oil V160 Capacity 1.8 liters (1.9 US qts, 1.6 Imp. qts) Drain Plug N07375 B. Replace automatic transmission fluid (a) Remove the drain plug, and drain the fluid. (b) Clean the drain plug. (c) Reinstall the drain plug securely. Idle N07380 (d) With the engine OFF, add new fluid through the dip–stick tube. Transmission fluid: 2JZ–GE Fluid type ATF DEXRON® II or equivalent Drain and refill capacity 1.6 liters (1.7 US qts, 1.4 Imp. qts) 2JZ–GTE Fluid type ATF type T–II or equivalent Drain and refill capacity 1.9 liters (2.0 US qts, 1.7 Imp. qts) (e) Start the engine and shift the selector into all positions from "P" through "L", and then shift into "P" position. (f) With the engine idling, check the fluid level. Add fluid up the "COOL" range on the dipstick.