SA–33 SUSPENSION AND AXLE – FRONT SUSPENSION STABILIZER BAR AND LINK REMOVAL Installation is in the reverse order of removal. 1. REMOVE FRONT WHEELS Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf) 2. REMOVE ENGINE UNDER COVER 3. REMOVE BOTH STABILIZER BAR LINKS Remove the nuts and stabilizer bar links from the stabilizer bar and the lower suspension arm. Torque: 74 N·m (750 kgf·cm, 54 ft·lbf) HINT: If the ball joint stud turns together with the nut, use a hexagon wrench to hold the stud. 4. REMOVE STABILIZER BAR (a) Remove the left and right apron seal set bolts. (b) Remove the 4 bracket bolts and the stabilizer bar with the cushions and brackets. Torque: 18 N·m (180 kgf·cm, 13 ft·lbf) 5. REMOVE CUSHIONS AND BRACKETS INSTALLATION HINT: Install the cushion to the outside of the line. R07309 R07310 R00615 R00210