SA–4 SUSPENSION AND AXLE – WHEEL ALIGNMENT WHEEL ALIGNMENT FRONT WHEEL ALIGNMENT 1. MEASURE VEHICLE HEIGHT Front vehicle height Engine | Tire size | Height 2JZ–GE | 225/50ZR16 | 185 mm (7.28 in.) 2JZ–GTE | 235/45ZR17 | 187 mm (7.36 in.) Measuring point: Measure from the ground to the center of the lower suspension arm front mounting bolt. NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to specification. If the vehicle height is not to specification, try to adjust it by pushing down on or lifting the body. 2. INSTALL CAMBER–CASTER–KINGPIN GAUGE OR ONTO WHEEL ALIGNMENT TESTER Follow the specific instructions of the equipment manufacturer. 3. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION Specifications | | 2JZ–GE | 2JZ–GTE | Camber | –0°20'±45' | –0°30'±45' Left–right error | 30' or less | 30' or less Caster | 3°20'±45' | 3°30'±45' Left–right error | 30' or less | 30' or less Steering axis inclination | 9°35'±45' (Reference) | 9°45'±45' (Reference) If the steering axis inclination is not as specified, after camber and caster have been correctly adjusted, recheck the steering knuckle front wheel for bearing or looseness. 4. INSPECT TOE–IN Toe–in (total): A+B: 0° ± 0.2° C–D: 0 ± 2 mm (0 ± 0.08 in.) If toe–in is not within specification adjust by the tie rod end. R06911 C8428 203382 SA3213