SA–43 SUSPENSION AND AXLE – REAR AXLE HUB 4. INSTALL OIL SEAL (Inner) (a) Using SST and a hammer, install a new oil seal. SST 09223–15020 NOTICE: Be careful not to damage the oil seal. (b) Coat MP grease to the oil seal lip. SST R07191 5. INSTALL DUST DEFLECTOR Using SST and a press, install a new dust deflector. SST 09608–35014 (09608–06020, 09608–06160) HINT: Align the holes for the ABS speed sensor in the dust deflector and carrier. SST R07038 HUB BOLT REPLACEMENT 1. REMOVE REAR WHEEL 2. REMOVE REAR BRAKE CALIPER AND DISC (See page SA–38) 3. REMOVE HUB BOLT Using SST, remove the hub bolt. SST 09628–10011 SST K4784 204024 4. INSTALL HUB BOLT (a) Install washer and nut to a new hub bolt, as shown in the illustration. (b) Turn the wheel nut to pull the hub bolt through until the underside of the hub bolt head touches the axle hub. 5. INSTALL REAR BRAKE DISC AND BRAKE CALIPER (See page SA–35) 6. INSTALL REAR WHEEL Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf) K4753 204025