EG–152 ENGINE – TURBOCHARGER SYSTEM (2JZ-GTE) Engine Wire Protector (2) (1) P11444 13. DISCONNECT ENGINE WIRE PROTECTOR FROM BODY Remove the 2 bolts, and disconnect the wire protector from the body. 14. DISCONNECT HOSES Disconnect these hoses: (1) Heater hose from No.3 water bypass pipe (2) EVAP hose from No.1 vacuum pipe Engine Wire Clamp Clamp (2) (1) P11403 15. DISCONNECT IAC VALVE PIPE FROM NO.2 AIR TUBE (a) Disconnect the engine wire from the clamp. (b) Disconnect these hoses: (1) Air hose (from No.1 vacuum pipe) from IAC valve pipe (2) Air hose from No.2 air tube (c) Disconnect the IAC valve pipe from the clamp. Clamp Clamp Clamp (1) (2) P11402 16. DISCONNECT NO.1 VACUUM PIPE FROM AIR TUBES (a) Disconnect these connectors: (1) VSV connector for intake air control valve (2) VSV connector for exhaust bypass valve (b) Disconnect the engine wire from the 3 clamps. (9) (8) (7) (6) (2) (5) (1) (4) (3) P11443 (c) Disconnect these hoses: (1) Air hose from No.4 air tube (2) Air hose from No.1 air tube (3) Air hose (from VSV for waste gate valve) from vacuum pipe (4) Air hose (from VSV for exhaust gas control valve) from vacuum pipe (5) Vacuum hose (from air bypass valve) from No.1 air tube (6) 2 air hoses (from VSV for exhaust bypass valve) from vacuum pipe (7) Air hose (from No.2 air tube) from vacuum pipe (8) Air hose from VSV for intake air control valve (9) 2 air hoses (from pressure tank) from vacuum pipe (d) Remove the 3 bolts, and disconnect the vacuum pipe from the air tubes.