RA-54 REAR AXLE AND SUSPENSION - Differential Support Member REPLACEMENT OF DIFFERENTIAL SUPPORT MEMBER CUSHION 1. REMOVE CUSHION Using a press, press out the cushion from the support member. 2. INSTALL NEW CUSHION Using a press, press the new cushion into the support member. NOTE: Assemble the cushion with the recesses at right angle to the support member. 3. CHECK DIFFERENTIAL SUPPORT MEMBER If the support member is damaged or worn, replace it. INSTALLATION OF DIFFERENTIAL SUPPORT MEMBER 1. INSTALL SUPPORT MEMBER (a) Put upper stopper on member. (b) Install the support member and lower stopper with nuts. NOTE: Hand tighten the nuts. 2. INSTALL DIFFERENTIAL CARRIER BOLT Install the differential carrier bolts. Bolt Upper Stopper Member Lower Stopper Nut