AUTOMATIC TRANSMISSION — Component Parts (Valve Body) AT-117 (Assembly of Valve Body) (See page AT-109) 1. POSITION NEW NO. 1 GASKET ON UPPER VALVE BODY Align a new No. 1 gasket at each bolt hole. 2. POSITION VALVE BODY PLATE ON NO. 1 GASKET Align the plate at each bolt hole. 3. POSITION NEW NO. 2 GASKET ON PLATE Align a new No. 2 gasket at each bolt hole. 4. PLACE UPPER VALVE BODY WITH PLATE AND GASKETS ON TOP OF LOWER VALVE BODY Align each bolt hole and gasket in the valve body. 5. INSTALL THE TWENTY-FIVE BOLTS TO UPPER VALVE BODY HINT: Each bolt length (mm, in.) is indicated in the figure. Torque: 65 kg-cm (56 in.-lb, 6.4 N-m) 0 38 • 20 • 28 mm (1.50) (0.79) (1.10) (in.) 6. INSTALL MANUAL VALVE 7. INSTALL DETENT SPRING Torque: 100 kg-cm (7 ft-lb, 10 N-m) Detent Spring