
C Inspection of resume/accel switch circuit.
Turn ignition switch off.
CONTROL SWITCH
INSPECT GROUND CONNECTION
Disconnect connector from control switch.
Is there continuity between terminal **4
of wire harness side connector and body
ground ?
No → • Open circuit in wire harness between
terminal *3 or **4 and body ground.
• Body ground faulty.
Yes
↓
INSPECT RESUME/ACCEL SWITCH
OPERATION
Is resume/accel switch operation normal ?
(See page BE-81)
No → Replace control switch.
Yes
↓
Connect connector to control switch.
COMPUTER
Disconnect connector from computer and
inspect connector on wire harness side as
follows.
INSPECT RESUME/ACCEL SWITCH
CIRCUIT
Is resistance value about 68 Ω between
terminal 17 and body ground with resume
/accel switch pushed on ?
No → Open or short circuit in wire harness
between terminal 17 of computer and
terminal *4 or **1 of control switch.
Yes
↓
Replace computer.
*: U.S.A. (w/ Airbag system)
**: CANADA (w/o Airbag system)