BO-24 BODY — Moulding (c) Using a screwdriver, pry loose the clips. HINT: Tape the screwdriver tip before use. (d) Using the scraper, peel off the acrylic formed tape. 2. CLEAN MOULDING MOUNTING SURFACE (a) Heat the acrylic formed tape on the body to 40°C — 60°C (104° — 140°F). NOTICE: Do not touch the acrylic formed tape. (b) Apply the polyester tape onto the acrylic formed tape and press it equal. NOTICE: Do not heat the polyester tape. Perform it quickly as soon as the acrylic formed tape is heated. (c) Peel off the polyester tape. (d) Perform the procedure again until the acrylic formed tape is mostly removed. (e) Using cleaner, wipe off stains on the body.