9. INSTALL OIL PUMP DRIVE SHAFT (a) While turning the drive shaft, insert slowly to avoid damaging the drive shaft bearing. (b) Install the bolt. Torque: 130 kg·cm (9 ft·lb, 13 N·m) 10. INSTALL REAR OIL SEAL RETAINER Install a new gasket and rear oil seal retainer with the five bolts. Torque: 130 kg·cm (9 ft·lb, 13 N·m) 11. INSTALL TIMING BELT CASE WITH WATER PUMP (a) Position new gaskets on the cylinder block. (b) Apply sealant to two or three threads of the 10 mm bolt end. Sealant: Part No. 08833-00070, THREE BOND 1324 or equivalent (c) Install the timing belt case with the seven bolts and three nuts. Torque: 12 mm head bolt and nut 195 kg·cm (14 ft·lb, 19 N·m) 14 mm head bolt 400 kg·cm (29 ft·lb, 39 N·m) Nut 60 Nut 45 Bolt Length (mm) Nut 20 20 20 12. INSTALL OIL PAN (See page LU-12) 13. INSTALL PS PUMP BRACKET