18. DISMOUNT INTERMEDIATE PLATE FROM VISE (a) Dismount the intermediate plate from the vise. (b) Remove the bolts, nuts, plate washers and gasket. 19. INSTALL TRANSMISSION CASE TO INTERMEDIATE PLATE (a) Apply seal packing to the transmission case as shown. Seal packing: Part No. 08826-00090, THREE BOND 1281 or equivalent (a) Align each bearing outer race and each shift fork shaft end with the case holes. (b) Using a plastic hammer, tap on the case to install it. 20. INSTALL BEARING SNAP RINGS Using snap ring pliers, install the two snap rings. 21. INSTALL FRONT BEARING RETAINER (a) Apply seal packing to the retainer as shown, and install it to the transmission case. Seal packing: Part No. 08826-00090, THREE BOND 1281 or equivalent