
RA-10 REAR AXLE AND SUSPENSION — Rear Axle Hub
(b) Using SST, remove the bearing inner race (outside)
from the axle hub.
SST 09950-20017
4. REMOVE OUTER OIL SEAL
Using a screwdriver, remove the outer oil seal from the axle
carrier.
5. REMOVE BEARING
(a) Using snap ring pliers, remove the snap ring.
(b) Using SST, press out the bearing outer race from the
axle carrier.
SST 09608-35014 (09608-06020, 09608-06100)
NOTICE: Always replace the bearing as an assembly.
(c) Remove the bearing inner race (inside) and two bear-
ings from the bearing outer race.
6. IF NECESSARY, REPLACE LOWER CONTROL ARM
BUSHING
(a) Using SST, press out the lower control arm bushing.
SST 09527-20011
(09710-14012 (09710-00030, 09710-00050)