AT2–114 A340E (2JZ—GTE) AUTOMATIC TRANSMISSION – TROUBLESHOOTING INSPECTION PROCEDURE 1 Check voltage between terminal TE1 and E1 of DLC2 or DLC1. C Measure voltage between terminals TE1 and E1 of DLC2 or DLC1. OK Voltage: 4 — 6 V TE1 E1 DLC2 DLC1 S-17-1 laj-23-1 NG OK Proceed to next circuit inspection shown on matrix chart (See page AT2–64). 2 Check harness and connector between ECM and DLC2, DLC1 and body ground (See page IN–30). OK NG Repair or replace harness or connector. Check and replace ECM.