IG–14 IGNITION SYSTEM – 2JZ–GE DISTRIBUTOR COMPONENTS FOR REMOVAL AND INSTALLATION High-Tension Cord Distributor Distributor Connector ♦ O-Ring Oil Filler Cap No.3 Timing Belt Cover ♦ Non-reusable part P11806 DISTRIBUTOR REMOVAL 1. DISCONNECT DISTRIBUTOR CONNECTOR 2. DISCONNECT HIGH–TENSION CORDS FROM DISTRIBUTOR Disconnect the 7 high–tension cords from the distributor. NOTICE: Pulling on or bending the cords may damage the conductor inside. P10601 3. REMOVE DISTRIBUTOR (a) Remove the nut. (b) Pull out the distributor. (c) Remove the O–ring from the distributor housing. P10602