EG-213 ENGINE — SFI SYSTEM (2JZ-GE) Torque: 64 N·m (650 kgf·cm, 47 ft·lbf) 13. California only: INSTALL VSV FOR FUEL PRESSURE CONTROL 14. INSTALL INTAKE AIR CONNECTOR PIPE 15. CONNECT CONTROL CABLES TO THROTTLE BODY 16. FILL WITH ENGINE COOLANT 17. CHECK FOR FUEL LEAKS (See item 5 in fuel system in precaution) FUEL PRESSURE PULSATION DAMPER COMPONENTS FOR REMOVAL AND INSTALLATION Fuel Pressure Pulsation Damper Gasket Engine Wire Bracket Gasket Starter Starter Connector Starter Wire ♦ Non-reusable part P18730 SST P11972 FUEL PRESSURE PULSATION DAMPER REMOVAL 1. REMOVE STARTER (See starter removal in Starting System) 2. REMOVE FUEL PRESSURE PULSATION DAMPER (a) Remove the pulsation damper and upper gasket. (b) Disconnect the fuel inlet pipe from the fuel pipe support, and remove the lower gasket.