EG–224 ENGINE – SFI SYSTEM (2JZ–GE) 0.50 mm P12050 Z09169 (b) Insert a 0.50 mm (0.020 in.) feeler gauge between the throttle stop screw and stop lever. Ohmmeter E2 IDL P12010 Z09132 (c) Connect the tester probe of an ohmmeter to the terminals IDL and E2 of the sensor. Turn P11464 (d) Gradually turn the sensor clockwise until the ohmmeter deflects, and secure it with the 2 set screws. 0.40 or 0.60 mm Ohmmeter E2 IDL P12050 P12010 Z09133 (e) Recheck the continuity between terminals IDL and E2. Clearance between lever and stop screw Continuity (IDL–E2) 0.40 mm (0.016 in.) Continuity 0.60 mm (0.024 in.) No continuity