
RS–91
SUPPLEMENTAL RESTRAINT SYSTEM – TROUBLESHOOTING
5 Check P squib circuit.
Center Airbag
Sensor Assembly
P squib
Spiral
Cable
D squib
P– P+
RO5911
AB0068
P (1) Disconnect center airbag sensor assembly
connector.
(2) Release airbag activation prevention mechanism
on center airbag sensor assembly connector.
(See page RS–72)
C For the connector (on the center airbag sensor as-
sembly side) between the center airbag sensor as-
sembly and front passenger airbag assembly mea-
sure the resistance between P+ and P–.
OK Resistance: 1 k or higher
OK
NG Repair or replace harness or connector be-
tween center airbag sensor assembly and
front passenger airbag assembly.
6 Check center airbag sensor assembly.
Center Airbag
Sensor Assembly
P squib
Spiral
Cable
D squib
P– P+
R06908
AB0068
P Connect center airbag sensor assembly connector.
C For the connector (on the center airbag sensor as-
sembly side) between the center airbag sensor as-
sembly and front passenger airbag assembly mea-
sure the resistance between P+ and P–.
OK Resistance: 1 k or higher
OK
NG Replace center airbag sensor assembly.
From the results of the above inspection, the malfunctioning part can now be considered normal. To
make sure of this, use the simulation method to check.