(b) Using a press, press in a new front bearing. 3. INSPECT REAR BEARING Turn each bearing by hand while applying inward force. If resistance is felt or the bearing sticks, replace the bearing. 4. IF NECESSARY, REPLACE REAR BEARING (a) Using SST, remove the bearing. SST 09286–46011 (b) Using SST and a press, press in a new bearing. NOTICE: Be careful of the bearing installation direction. SST 09820–00030 Upward SST Downward Magnetic Switch 1. DO PULL–IN COIL OPEN CIRCUIT TEST Using an ohmmeter, check that there is continuity between terminals 50 and C. If there is no continuity, replace the magnetic switch. Ohmmeter Continuity Terminal C Terminal 50