MT1–38 W58 MANUAL TRANSMISSION – COUNTER GEAR AND REVERSE IDLER GEAR 2. IF NECESSARY, REPLACE COUNTER GEAR CENTER BEARING (a) Remove the bearing from the counter gear. (b) Install a new bearing on the counter gear. HINT: Engage the roller cages. (c) Using SST, tap out the bearing outer race. SST 09608–35014 (09608–06020, 09608–06090) HINT: The outer race will be installed later, as the transmission is assembled. SST COUNTER GEAR ASSEMBLY INSTALL SYNCHRONIZER RING ASSEMBLY TO NO.3 HUB SLEEVE (a) Push the synchronizer key spring, install the shifting key and key spring to the reverse synchronizer ring. (b) Using a screwdriver, push the 3 key springs into the synchronizer ring spring gaps. (c) Install the synchronizer cone ring to the reverse synchronizer pull ring and turn the pull ring.