
AT-95
A340E (2JZ-GTE) AUTOMATIC TRANSMISSION - COMPONENT PARTS INSTALLATION
Front
Planetary
Ring Gear
Forward
Clutch
AT5433
(d) Align the splines of the front planetary ring gear with the
flukes of the discs and install the front planetary ring gear
to the forward clutch.
Bearing
Y 004073
17. INSTALL ASSEMBLED DIRECT CLUTCH, FORWARD
CLUTCH AND FRONT PLANETARY RING GEAR INTO
CASE
(a) Coat the bearing and race with petroleum jelly and install
them onto the ring gear.
Bearing and race diameter
mm (in.)
Inside Outside
Bearing and Race 35.0 (1.378) 53.8 (2.118)
(b) Install the assembled direct clutch, forward clutch and
front planetary ring gear into the transmission case.
AT5214 Z06875
(c) Using vernier calipers, measure the distance between the
sun gear input drum and direct clutch drum.
Height:
9.8-1 1.8 mm (0.386-0.465 in.)
If the values are non-standard, check for improper instal-
lation.
AT5213
Front
↑
(d) Coat the assembled bearing and race with petroleum jelly
and install it onto the forward clutch.
Assembled bearing and race diameter
mm (in.)
Inside Outside
Assembled bearing
and race 33.5 (1.319) 47.8 (1.882)
AT5137
AT5134 Z05236