AT2–22 A340E (2JZ—GTE) AUTOMATIC TRANSMISSION – ASSEMBLY REMOVAL AND INSTALLATION TRANSMISSION REMOVAL Installation is in the reverse order of removal. INSTALLATION HINT: After installation, fill A/T fluid and check fluid level. (See page AT2–42) 1. REMOVE LEVEL GAUGE 2. REMOVE FILLER PIPE Remove the bolt and filler pipe. 3. REMOVE ENGINE UNDER COVER 4. DISCONNECT OXYGEN SENSOR (a) Remove the 2 nuts. (b) Remove the cover and the sensor. 5. REMOVE EXHAUST PIPE (a) Remove the 2 nuts and 4 bolts. (b) Disconnect the rings from the exhaust pipe brackets. (c) Remove the exhaust pipe, gasket and bracket. Torque: Bracket X Transmission housing: 37 N·m (380 kgf·cm, 27 ft·lbf) No.2 exhaust pipe X Center exhaust pipe: 58 N·m (590 kgf·cm, 43 ft·lbf) 6. REMOVE HEAT INSULATOR Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf) NORMAL ROOF SPORT ROOF R06861 Q04100 Q04298 Q04362 Q04362 Z09965