AT2–23 A340E (2JZ—GTE) AUTOMATIC TRANSMISSION – ASSEMBLY REMOVAL AND INSTALLATION NORMAL ROOF SPORT ROOF R06883 OO1098 20966 7. REMOVE REAR CENTER FLOOR CROSSMEMBER BRACE Torque: 13 N·m (130 kgf·cm, 9 ft·lbf) 8. REMOVE PROPELLER SHAFT (See page PR–7) 004259 9. DISCONNECT SHIFT CONTROL ROD FROM SHIFT LEVER Torque: 13 N·m (130 kgf·cm, 9 ft·lbf) INSTALLATION HINT: Inspect and adjust the park/ neutral position switch. (See page AT2–43) 004343 10. REMOVE SHIFT CONTROL ROD FROM PARK/NEUTRAL POSITION SWITCH Torque: 16 N·m (160 kgf·cm, 12 ft·lbf) 11. DISCONNECT THESE CONNECTORS: • O/D direct clutch speed sensor • No.1 vehicle speed sensor • No.2 vehicle speed sensor • Solenoid wire • Park/neutral position switch • A/T fluid temp. sensor 003702 12. DISCONNECT CONNECTORS AND CABLE FROM STARTER (a) Remove the nut and disconnect the wire harness. (b) Disconnect the connectors.