BR–48 BRAKE SYSTEM – ANTI–LOCK BRAKE SYSTEM (ABS) FRONT SPEED SENSOR COMPONENTS Front Speed Sensor Grease Cap ♦O-Ring Front Speed Sensor Rotor Front Fender Splash Shield ♦ Non-reusable part Z13545 FRONT SPEED SENSOR REMOVAL Installation is in the reverse order of removal. AFTER INSTALLATION, CHECK SPEED SENSOR SIG- NAL (See page BR–62) 1. DISCONNECT CONNECTOR (a) Remove the front fender splash shield. (b) Disconnect the speed sensor connector. 2. REMOVE SPEED SENSOR (a) Remove the 3 clamp bolts holding the sensor harness to the body and upper suspension arm. Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf) (b) Remove the speed sensor from the steering knuckle. Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf) (c) Remove the O–ring from the speed sensor. R07259 R07261