LU-2 LUBRICATION - OIL AND FILTER P12279 7. DISCONNECT A/C COMPRESSOR FROM ENGINE (a) Remove the 4 bolts and nut. (b) Using a torx socket (E10), remove the stud bolt. (c) Disconnect the compressor connector. (d) Remove 4 bolts and pull the compressor downward. Oil Pressure Switch SST P12303 8. REMOVE OIL PRESSURE SWITCH, AND INSTALL OIL PRESSURE GAUGE (a) Disconnect the oil pressure switch connector. (b) Using SST, remove the oil pressure switch. SST 09816-30010 (c) Install an oil pressure gauge. 9. REINSTALL A/C COMPRESSOR (a) Temporarily install the A/C compressor with the 4 bolts. (b) Connect the compressor connector. (c) Install the compressor with the stud bolts, 4 bolts and nut. Torque: Stud bolt: 26 N·m (265 kgf·cm, 19 ft·lbf) Bolt and nut: 52 N·m (530 kgf·cm, 38 ft·lbf) 10. REINSTALL DRIVE BELT Install the drive belt by turning the drive belt tensioner clock- wise. 11. WARM UP ENGINE Allow the engine to warm up to normal operating temperature. Oil Pressure Gauge P12301 12. CHECK OIL PRESSURE Oil pressure: At idle 49 kPa (0.5 kgf/cm2, 7.1 psi) or more At 3,000 rpm (2JZ-GE) or 4,000 rpm (2JZ-GTE) 324 - 579 kPa (3.3 - 5.9 kgf/cm2, 47 - 84 psi) 13. REMOVE DRIVE BELT 14. DISCONNECT A/C COMPRESSOR FROM ENGINE 1997 SUPRA (RM502U) Author : Date : 1449