
IG-28
IGNITION SYSTEM — 2JZ-GTE
CAMSHAFT POSITION SENSOR COMPONENTS FOR REMOVAL AND INSTALLATION
Camshaft Position Sensor No.1
Connector
Gasket
Camshaft Position Sensor No.2
Air Hose for IAC Valve
Engine Hanger
Ground Strap
P18041
CAMSHAFT POSITION SENSOR REMOVAL
Installation is in the reverse order of removal.
1. DISCONNECT IAC VALVE CONNECTOR
2. DISCONNECT AIR HOSE FROM IAC VALVE
3. REMOVE ENGINE HANGER
Remove the 2 bolts, ground strap and engine hanger.
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
4. DISCONNECT CAMSHAFT POSITION SENSOR CONNECTORS
5. REMOVE CAMSHAFT POSITION SENSORS
Remove the 4 bolts, 2 camshaft position sensors and 2 gaskets.
Torque: 6.4 N·m (65 kgf·cm, 56 in.·lbf)
F12179