MA–16 MAINTENANCE – MAINTENANCE OPERATIONS 37 N·m P11576 200 N·m 125 N·m P11581 58 N·m 175 N·m N07516 214727 22. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY Tighten the following parts: • Front seat–to–body mounting bolts Torque: 37 N·m (375 kgf·cm, 27 ft·lbf). • Front suspension member–to–body mounting bolt Torque: Front side 125 N·m (1,280 kgf·cm, 92 ft·lbf) Rear side 200 N·m (2,040 kgf·cm, 148 ft·lbf) • Rear suspension member–to–body mounting bolts. Torque: 175 N·m (1,790 kgf·cm, 129 ft·lbf) • Rear suspension member rear cushion–to–body mounting bolts Torque: 58 N·m (590 kgf·cm, 43 ft·lbf) 23. BODY INSPECTION (a) Check the body exterior for dents, scratches and rust. (b) Check the underbody for rust and damage. If necessary, replace or repair. 24. ROAD TEST (a) Check the engine and chassis for abnormal noises. (b) Check that the vehicle does not wander or pull to one side. (c) Check that the brakes work properly and do not drag. (d) Perform setting of the parking brake shoes and drum. 25. FINAL INSPECTION (a) Check the operation of the body parts: • Hood Auxiliary catch operates properly Hood locks securely when closed • Front and rear doors Door locks operate properly Doors close properly • Luggage compartment door Door lock operates properly • Seats Seat adjusts easily and locks securely in any position Front seat back locks securely in any position Folding–down rear seat backs lock securely (b) Be sure to deliver a clean car. Especially check: • Steering wheel • Shift lever knob • All switch knobs • Seats