EG–295 ENGINE – SFI SYSTEM (2JZ–GTE) E2 IDL P12008 209129 (d) Connect the tester probe of an ohmmeter to the terminals IDL and E2 of the sensor. Turn P12058 (e) Gradually turn the sensor clockwise until the ohmmeter deflects, and secure it with the 2 set screws. Sub-Throttle Valve Closed 0.41 or 0.48 mm Ohmmeter E2 IDL P12007 P12008 VTA VC 209130 (f) Recheck the continuity between terminals IDL and E2. Clearance between lever and stop screw | Continuity (IDL–E2) 0.41 mm (0.016 in.) | Continuity 0.48 mm (0.019 in.) | No continuity P11981 6. REINSTALL SUB–THROTTLE ACTUATOR Install the sub–throttle actuator with the 4 screws.