INTRODUCTION IN-11 Proper and Efficient Work Procedures REMOVAL PRE–REMOVAL MEASURING Before removal or cutting operations, take measurements in accordance with the dimension diagram. Always use a puller to straighten a damaged body or frame. NUMBER OF SPOT WELDS AND PANEL POSITIONS The number of spot welds and the panel positions to be removed are shown for your reference. HINT: See "Symbols" on page IN–4, 5. REMOVAL OF ADJACENT COMPONENTS When removing adjacent components, apply protective tape to the surrounding body and your tools to prevent damage. HINT: See "Handling Precautions on Related Components" on age IN–6. ⊙ – 10 PRECAUTIONS FOR DRILLING OR CUTTING Check behind any area to be drilled or cut to insure that there are no hoses, wires, etc., that may be damaged. HINT: See "Handling Precautions on Related Components" on page IN–6. CUTTING AREA Always cut in a straight line and avoid reinforced area. WRONG Cutting Okay Corners Reinforcement