AFTER ASSEMBLY 1. INSTALL OIL PUMP (See oil pump installation in Lubrication System) 2. INSTALL WATER PUMP (See water pump installation in Cooling System) 3. 2JZ–GTE: INSTALL CRANKSHAFT POSITION SENSOR Torque: 8.8 N·m (90 kgf·cm, 78 in.·lbf) 4. INSTALL RH ENGINE MOUNTING BRACKET AND INSULATOR ASSEMBLY HINT: The RH mounting bracket is marked "A ← EX". Torque: 58 N·m (590 kgf·cm, 43 ft·lbf) 5. INSTALL ENGINE COOLANT DRAIN PLUG Torque: 29 N·m (300 kgf·cm, 22 ft·lbf) 6. 2JZ–GTE: INSTALL UNION FOR OIL COOLER HOSE (a) Apply adhesive to 2 or 3 threads of the union. Adhesive: Part No. 08833–00070, THREE BOND 1324, or equivalent (b) Install the union. Torque: 39 N·m (400 kgf·cm, 29 ft·lbf) Adhesive P12540 7. INSTALL KNOCK SENSORS AND OIL PRESSURE SWITCH (a) Apply adhesive to 2 or 3 threads of the oil pressure switch. Adhesive: Part No. 08833–00080, THREE BOND 1344, LOCTITE 242 or equivalent Adhesive P10820 (b) Using SST, install the 2 knock sensors and oil pressure switch. SST 09816–30010 Torque: Knock sensor 44 N·m (450 kgf·cm, 33 ft·lbf) Oil pressure switch 14 N·m (150 kgf·cm, 11 ft·lbf) Oil Pressure Switch Knock Sensor SST P13197