B–17 TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT Service hole Type F (For C–Type Connector) (1) Insert the special tool into the service hole. Retainer (2) Move the special tool to the direction of the arrow and release the lock. HINT: Lift the retainer up after moving it to the direction of the thin arrow shown in the illustration. (3) Pull the retainer forward by hand and remove the retainer from the housing. Special tool Lock Type G ● Insert the special tool into the position shown in the illustration. Pry it to the direction of the arrow and push the lock up to release it. Wire Harness Repair Manual (RM1022E) 27